优道三元催化高效清洗剂

品牌：UD优道

系统：进排气系统

产品编号：UD-01.265/325ml

企业标准：Q/YKJH 8

产品仅供4S店使用

产品特点：

1. 有用消除三块离子液体器漆层的积碳及留物。2. 找回恩贝益催化剂的作用器的过滤职能，降烟气产生。3. 加强自己汽油助燃速率，加强冷车通电耐磨性，变低油耗，康复汽车发心理推力。4. 缩短恩贝益崔化器的适用耐用度，变少定期维护基础性成本费用。

使用方法：

1、开机发起机至平常工作任务体温，2、用使用油门一定位置器将发动机轉速一定位置在2500转3、找、折开节气门后的正空管（有正空风量），紧邻节气门第一次个支管最优，4、把软件瓶口开启接触在用擦拭机械上（或放入机械铁罐中），并把机械出液全透明软水管与轿车的真空箱管项目对接，5、浏览器打开的设备旋转开关按钮，将水流量调正旋转开关按钮调到新产品成滴入装状进入到真空箱管为合理的，刷洗时期为25-301分钟最佳选择，6、整瓶的产品用完，除碳的时间成功，拨掉连到新汽车负压管插头并恢复功能原状，7、将油门固定住器拆下来，以每500转/10秒轻缓给油，日趋加至3000转，以稍快转速多次重复上面舞蹈动作。8、待进排气阀声顺滑时再排碳1五钟头，除碳中及排碳时坚决不能够 重踩油门，排碳后必要使用路试。

Product features:

1. Effectively remove the carbon deposition and residue on the surface of the ternary catalytic converter.2. Restore the purification function of the three-way catalytic converter and reduce the exhaust emission.3. Improve fuel combustion efficiency, improve start-up performance of cold vehicle, reduce fuel consumption and restore engine power.4. Extend the service life of three-element catalytic converters and reduce the comprehensive maintenance cost.

Usage:

1. Start the engine to the normal operating temperature,2. Fixed the engine speed at 2500 revolutions with special accelerator fixator3. Look for and open the vacuum tube behind the throttle (with vacuum suction). It is best to be close to the first pipe opening of the throttle.4. Open the product bottle mouth and connect it to the special cleaning equipment (or put it into the equipment tin), and connect the device's liquid outlet transparent hose to the vacuum tube of the car.5. Turn on the device switch, and adjust the flow rate adjustment switch to the product to drip into the vacuum tube. The cleaning time is 25-30 minutes.6. When the whole bottle of product is used up, the decarbonization time is completed, and the vacuum tube connector of the car is pulled out and restored to its original state.7. Remove the accelerator fixator and gently refuel every 500rpm / 10s, gradually add to 3000 RPM and repeat the above action at a slightly faster speed.8. When the inlet and exhaust sound is smooth, the carbon shall be discharged for another 15 minutes. In addition, the gas pedal shall not be pressed again when the carbon is removed and the road test shall be conducted after the carbon is discharged.