优道缸内积碳清晰剂国际品牌：优道 產品编码：UD-246各个企业注标编号规则：Q/YKJH 42成品只供4S店施用

成品耐磨性1、有效率除垢丙烷燃烧仓、柱塞、柱塞环槽等机械部件上的积碳、映照物；2、快产生卡死在活赛环槽中的活赛环，复原活赛环的优质的配置及田径运动性；3、降底液压油的需要量量，降底发起机的作业燥音，降底害处乙炔气的排放出；4、营养均衡气式压、完善干劲、节约使用燃料。 食用方案1、升温汽车发驱力到常规溫度；2、先后顺序拆掉各汽缸火星子塞；3、每缸侵入即使刷洗剂，静置30分；4、装上小点火线圈，康复很多零部件；5、起动启倾向怠速在运转五分钟；6、并且踩油门至2000-3000转高速运行，以供就已膨松的积碳齐全排放，直氮氧化合物烟尘排空（约2-5分钟钟）。 注重项目1、请逃避将本护肤品掉在汽车行业漆面上方；2、本企业产品对恩贝益催化反应器、氧感测器器、橡胶肉食品肉食品及密封隔绝件无欠佳决定；3、利用该软件后，就不需要换研磨油。

Product performance1. Effectively clean carbon deposits and attachments on combustion chamber, piston, piston ring groove and other parts;2. Quickly release the piston ring stuck in the piston ring groove to restore the elasticity and mobility of the piston ring;3. Reduce the consumption of engine oil, the working noise of engine and the emission of harmful gases;4. Balance cylinder pressure, improve power and save fuel.

Usage 1. Preheat the engine to normal temperature;2. Remove the spark plugs of each cylinder in turn;3. Inject one detergent into each cylinder and leave it for 30 minutes;4. Install spark plug and recover all parts;5. Start the engine to idle for 1 minute;6. Then step on the accelerator to 2000-3000 for transfer, so that the softened carbon deposit can be completely discharged until the exhaust smoke is exhausted (about 2-3 minutes).

Note

1. Please avoid dropping the product on the car paint;2. The product has no adverse effect on the three-way catalytic converter, oxygen sensor, rubber products and seals;3. After using the product, there is no need to change the lubricating oil.