品牌：UD优道

产品编号：UD-247/1.5G

企业标准：Q/YK 058-2012

仅供4S店使用

产品特点：

1、在磨蹭外观上转化成塑料卫浴陶瓷层，恢复如初或优化调整零器件之前的搞好团结精准度；2、要医治缸筒环的几何的封密性；的提升并均衡性各标准气缸的有压力；3、处理各静摩擦力机件的摩擦并可以防止其立刻摩擦；4、缩减起思想的躁声和激振吗、有效有效降低气油需要量、提生起思想工作效率、有效有效降低废气排放中CO和HC的硫含量；5、大幅垂直提升发动机机油压力差，调长热车机动用应用年限；可与各种各样发动机机油相溶。　

使用方法：

1、加热起心理，到日常室内温度，再启用起心理；2、使用 起心理齿轮油口盖，将优道缸压处理剂从齿轮油口挤入，之后盖好齿轮油口盖；3、进行热车机，怠速两分种；4、日常机动车变道。当累计额机动车变道50钟头（可能1500km/h），净化处理已完成。5、若要测试英文方法缸压变现，请怠速高速启用30min，启用500千米后测试英文方法效果好极佳。

Product features:

1. Generate metal ceramic layer on the friction surface to restore or optimize the coordination precision between parts;2. Can restore the geometric sealing of piston ring; Increase and balance the pressure of each cylinder;3. Repair and prevent the wear and tear of all friction parts;4. Reduce the noise and vibration of the engine, reduce fuel consumption, increase engine power, and reduce the content of CO and HC in tail gas;5. Increase the oil pressure and extend the service life of the engine; It can dissolve with various oil.

Usage:

1. Preheat the engine to normal temperature and then close the engine;2. Open the oil cap of the engine, and squeeze the pressure restorer of the cylinder into the oil port of the engine, then cover the oil cap;3. Start the engine and idle for 5 minutes;4. Drive normally. When traveling for a total of 50 hours (or 1,500 kilometers), the handling is complete.5. If the cylinder pressure change needs to be tested, please idle for 30 minutes, and the test effect will be better after running 500 kilometers.